On September 27, 2023, the Bureau of Standards, Metrology and Inspection (BSMI) under the Ministry of Economic Affairs (MOEA) of Taiwan announced revised inspection regulations for portable air conditioners. These changes aim to enhance safety and efficiency standards for these appliances.

Portable air conditioners with a rated voltage below 250 V must now adhere to the following standards:

1. CNS 60335-1:2014 and CNS 60335-2-40:2015 - General Safety Requirements
2. CNS 13783-1:2013 - Efficiency and Performance
3. CNS 18326:2022 - Specifically, Section 5.1 on Air Conditioning Capacity Test, Section 5.3 on Condensation Water Control and Performance Test, and Section 9 on Marking
4. CNS 15663:2013 - Guidelines for Environmental Conscious Design

Additionally, if the product incorporates secondary lithium batteries, the single cells (including single cells in the battery pack) must comply with CNS 15364:2013, and the battery pack must meet CNS 62133-2:2018 Sections 7.3.8.1 (Vibration) and 7.3.8.2 (Mechanical Shock) standards. Products must either adhere to these or the latest national and international standards, supported by verification documents or test reports from accredited agencies or laboratories.

Exemptions from the "Air Conditioning Capacity Test" item in Section 5.1 of CNS 18326 are granted to products that do not use compressors for their refrigeration systems.

Products are exempt from inspection if they:

• Have a USB connection port, are rated at DC 5 V, do not come with a power adapter, and do not use secondary batteries
• Are powered solely through car power, equipped with a car cigarette lighter power supply, are not powered by secondary battery
• Utilize only three-phase voltage as power supply
• Simply use primary batteries as the power supply
• Are toy products subject to inspection announced by BSMI

Starting from January 1, 2025, both imported and domestically produced listed air conditioners will undergo batch-to-batch inspection for type approval or dual verification and registration. BSMI is accepting applications for type approval or verification registration from the announcement date. Products undergoing batch-to-batch inspection must first receive type approval certificate and submit for inspection before import or factory shipment. Verification registration entails a product verification registration certificate issued upon BSMI review.

Applicants for a certificate from the BSMI from the date of announcement must provide a type test report of the inspection standard, restricted substance content location information, and a restricted substance content indication statement. Certificates issued prior to the implementation date will be valid from January 1, 2025, to December 31, 2027. Certificates issued post-implementation will have a three-year validity from the issuance date, extendable once if the product and inspection standards remain unchanged.

Approved or verification-registered products must display an inspection mark on the product body.

Products subject to verification registration, should have one of the following inspection marks:

‍

For products subject to type approval, the following inspection marks should be used:

The placement of the identification number should be directly below or to the right of the basic icon, with restricted substances listed on the second line.

While the inspection mark's size is not fixed, it must be prominently displayed in proportion to the product size.

The "RoHS" text means that the product contains restricted substances that do not exceed the percentage content. The "RoHS(XX,XX)" text highlights that the product contains restricted substances (XX) with the content exceeding the percentage content standard value.

For the full text of the regulations, visit the official gazette link.

‍

‍

The information has been prepared by the GMA Consult Group team.

If you want to get regular updates and insights from the industry, subscribe to our newsletter.‍

GMA 컨설팅 그룹은 전 세계 모든 국가에서 IT, 텔레콤 및 산업용 전기 제품에 대한 국제 유형 승인 및 글로벌 시장 액세스 서비스의 전체 주기를 제공합니다. 전 세계 규정, 규정 준수, 인증 및 적합성 평가에 대한 입증된 전문 지식을 갖춘 GMA Consult Group은 회사에서 원하는 방식으로 거의 제로한 노력으로 모든 시장에 대한 액세스를 가속화할 수 있도록 지원합니다.

Need your own guide to the world of certification and approvals? Don't hesitate to contact us via info@gma.trade.‍